PONYTAILS
£1.79 £2.99 You save: 40% (£1.20)
Dispatch Deadline:
Submit your order in the next:
Our Fusion Finger Protectors – 10 Pack are designed to provide an additional protective barrier for the fingers during compatible Nail-Tip / U-Tip pre-bonded hair extension application.
Also known as finger guards or finger cots, each protector fits over an individual finger and can be used while handling and shaping compatible heated keratin bonds during professional fusion fitting.
Each pack contains 10 individual finger protectors, making them a practical addition to a professional pre-bonded hair-extension fitting kit.
The single-finger design allows the protector to be worn only on the finger or fingers required during the application process.
Nail-Tip / U-Tip extensions are fitted by softening a compatible keratin attachment using a fusion heat connector before the bond is shaped around the selected section of natural hair.
A finger protector can provide an additional barrier between the finger and the warmed bond while it is being handled and shaped using the appropriate professional fitting technique.
The finger-cot style is designed to sit closely around an individual finger while allowing the fitter to continue working with the keratin attachment during application.
Fit can vary between users because finger size and shape differ. The product is supplied in a one-size format.
The finger protectors may be reused where they remain clean, intact and free from deterioration or distortion. Inspect each protector before use and replace it if the material shows signs of damage.
Place the protector over the required finger before beginning the heat-fusion stage of the fitting process. Once the compatible keratin bond has been softened with the appropriate fusion connector, the protected finger can assist with the shaping process according to the professional fitting method being followed.
Finger protectors should be used alongside correct heat-tool handling, suitable application temperatures and appropriate professional technique.
Explore our Nail-Tip Hair Extensions, professional Heat Connectors and step-by-step Nail-Tip / U-Tip fitting guidance for compatible pre-bonded hair-extension application.
Browse our Nail-Tip / U-Tip Hair Extensions for professional pre-bonded application using compatible keratin bonds and fusion tools.
Browse our Heat Connectors for professional application of compatible Nail-Tip / U-Tip pre-bonded hair extensions.
Read our step-by-step guide covering professional Nail-Tip / U-Tip pre-bonded hair-extension application using compatible fusion tools.
Explore this Finger Protectors (10 Pack) from the HairXtensions Micro & Nano Ring Tools collection. Choose tools to suit the attachment method and fitting technique.
Always check the product's specifications and compatibility before use. Professional training is recommended for semi-permanent hair extensions.
These individual Chinese Remy human hair extensions use a pre-bonded keratin Nail-Tip / U-Tip attachment and are fitted professionally using a fusion heat connector.
At approximately 0.5g per strand, this range provides a lighter individual strand that is useful for flexible placement and blending.
These extensions are supplied in quantities of 25 strands.
As a general guide, approximately 150–200 strands (6–8 bundles) may be used for a full-head application, while around 75–100 strands (3–4 bundles) may be used for a half-head application.
The exact amount required depends on your natural hair thickness, density, existing length and the finished result you want to achieve. We recommend discussing the required quantity with your hairstylist before ordering.
Nail-Tip extensions use a heat-fusion fitting method. The pre-bonded keratin tip is softened using a professional fusion heat connector and secured around an appropriately sized section of natural hair.
View our full Nail-Tip / U-Tip fitting guide.
Nail-Tip extensions should be removed carefully using suitable professional removal products and tools to soften and separate the keratin attachment from the natural hair.
View our full Nail-Tip / U-Tip removal guide.
With suitable aftercare, the extensions can be worn for approximately 2–3 months. They can be washed, curled and straightened, while care should be taken around the keratin attachments.
View our hair extension aftercare advice.
Product: Fusion Finger Protectors (10 Pack)
Quantity: 10 individual finger protectors
Material: Plastic latex
Size: One size
Design: Single-finger protective cots
Suitable for: Compatible Nail-Tip / U-Tip pre-bonded extensions
Primary use: Additional finger protection when handling and shaping warmed keratin bonds
Used alongside: Professional fusion heat connectors
Reusable: When clean, intact and suitable for further use
Application: Professional hair extension fitting
1. Check that the finger protector is clean, undamaged and suitable for the intended professional fusion-fitting technique.
2. Place a protector over the finger used to assist with shaping the softened keratin bond. Ensure it fits securely without restricting circulation.
3. Prepare and section the natural hair according to the correct Nail-Tip / U-Tip application method.
4. Position the compatible pre-bonded hair extension at the appropriate distance from the scalp.
5. Use a professional fusion heat connector to soften the keratin attachment, keeping the heated tool away from fingers and skin.
6. Where appropriate for the fitting technique, use the protected finger to assist with shaping the softened bond around the selected natural hair section.
7. Allow the completed keratin bond to cool and set before handling it further.
8. After fitting, remove the finger protector and inspect it. Clean and store it appropriately if it remains suitable for reuse; otherwise, discard it.
• Wear the protector on the finger used to help shape softened keratin bonds during compatible fusion fitting.
• Check the fit before starting. One-size protectors may fit differently depending on finger size and shape.
• Select a fresh or suitably cleaned protector that is free from tears, holes or heat damage.
• Use the correct fusion heat connector temperature for the keratin attachment and fitting method.
• Keep the heated connector away from the finger protector, as the protective material may be damaged by direct contact.
• Work on one keratin attachment at a time, maintaining controlled bond placement and comfortable spacing from the scalp.
• Allow each completed bond to cool before assessing its shape and security.
• Replace protectors showing signs of deterioration rather than continuing to use damaged material.
• Finger protection is an additional precaution, not a substitute for safe technique or professional training.
• Finger protectors provide an additional protective barrier but do not eliminate the risk of burns or other injury.
• Never touch the heated plates or tips of a fusion heat connector with the protector or an unprotected finger.
• Do not assume that plastic-latex finger cots are suitable for direct contact with very hot tools or surfaces.
• Inspect every protector before use. Discard any that is torn, cracked, melted, distorted or otherwise damaged.
• Check material compatibility before use. Avoid using latex-containing products where a latex allergy or sensitivity is known or suspected.
• Stop using the protector if irritation, discomfort, excessive tightness or an unexpected reaction occurs.
• Follow the fusion tool manufacturer's temperature and safety instructions throughout application.
• Clean reusable protectors appropriately and allow them to dry fully before storage, provided their condition remains suitable for reuse.
• Store away from excessive heat, direct sunlight and sharp objects. Keep out of reach of young children.
• Professional training in Nail-Tip / U-Tip keratin fusion application is recommended.
Explore compatible products and useful accessories.
Please review our returns policy for eligibility and instructions. Your statutory rights are not affected.