£7.99
Dispatch Deadline:
Submit your order in the next:
The HairX Pro Tape Scraper Tool is designed to assist with removing old adhesive from compatible Tape-In Hair Extensions when preparing the extensions for reapplication.
The scraper provides a controlled way to work softened adhesive residue away from the Tape-In tab area and is supplied with 10 replacement scraper blades. It can also be used alongside the HairX Pro Tape Removal Board, available as part of our complete Tape Tabs Removal Kit.
When Tape-In extensions are being prepared for refitting, the existing adhesive normally needs to be removed before new replacement tape tabs are applied.
The HairX Pro Tape Scraper Tool is designed to help lift and remove softened adhesive residue from the Tape-In tab area using a controlled scraping action.
The scraper is supplied with 10 replacement blades, allowing the working blade to be changed when it becomes worn, damaged or otherwise unsuitable for continued use.
Inspect the blade before each use and replace it when necessary to maintain appropriate control during adhesive removal.
Before using the scraper, we recommend applying a compatible Tape-In Hair Extensions Remover to help soften the existing adhesive.
Allow the remover suitable time to work before carefully working the scraper across the adhesive tab area. Avoid applying excessive pressure if the residue remains resistant.
Place the Tape-In extension on a suitable protected working surface with the adhesive tab accessible. Once the old adhesive has been softened with a compatible remover, position the scraper at the edge of the adhesive and carefully work across the tab area to lift away the residue.
Repeat the process as required until the old adhesive has been sufficiently removed. The extension should then be appropriately cleaned and prepared before new adhesive is applied.
Once the old adhesive has been removed and the Tape-In extension has been correctly cleaned and prepared, compatible HairX Pro Replacement Tape Tabs can be applied before professional refitting.
Correct cleaning and preparation are important because residual remover, oils or old adhesive can affect the performance of replacement tape.
For a dedicated working surface, the scraper can be paired with our HairX Pro Tape Removal Board. The complete scraper and board system is available in the HairX Pro Tape Tabs Removal Kit .
The complete kit includes the working board, scraper, replacement blades and carry case for professional Tape-In adhesive preparation.
Explore our Tape-In Hair Extensions, professional application tools, replacement tape tabs, removal products, complete Tape Tabs Removal Kit and step-by-step fitting guidance.
Browse our Tape-In Hair Extensions for professional application using compatible adhesive tabs, fitting tools and aftercare.
Browse the HairX Pro Tape Application Plier designed for professional application of compatible Tape-In hair extensions.
Browse our replacement adhesive tabs for preparing compatible Tape-In hair extensions for professional reapplication.
Explore our 250ml Tape-In remover designed to assist with releasing compatible adhesive during professional removal and preparation.
Read our step-by-step guide covering professional Tape-In hair extension preparation and application.
Browse the complete Tape Tabs Removal Kit with working board, scraper, replacement blades and carry case for professional Tape-In adhesive preparation.
Explore this HairX Pro Tape Removal Scraper Tool from the HairXtensions Micro & Nano Ring Tools collection. Designed for suitable professional ring release or removal procedures.
Always check the product's specifications and compatibility before use. Professional training is recommended for semi-permanent hair extensions.
These individual Chinese Remy human hair extensions use a pre-bonded keratin Nail-Tip / U-Tip attachment and are fitted professionally using a fusion heat connector.
At approximately 0.5g per strand, this range provides a lighter individual strand that is useful for flexible placement and blending.
These extensions are supplied in quantities of 25 strands.
As a general guide, approximately 150–200 strands (6–8 bundles) may be used for a full-head application, while around 75–100 strands (3–4 bundles) may be used for a half-head application.
The exact amount required depends on your natural hair thickness, density, existing length and the finished result you want to achieve. We recommend discussing the required quantity with your hairstylist before ordering.
Nail-Tip extensions use a heat-fusion fitting method. The pre-bonded keratin tip is softened using a professional fusion heat connector and secured around an appropriately sized section of natural hair.
View our full Nail-Tip / U-Tip fitting guide.
Nail-Tip extensions should be removed carefully using suitable professional removal products and tools to soften and separate the keratin attachment from the natural hair.
View our full Nail-Tip / U-Tip removal guide.
With suitable aftercare, the extensions can be worn for approximately 2–3 months. They can be washed, curled and straightened, while care should be taken around the keratin attachments.
View our hair extension aftercare advice.
Please review our returns policy for eligibility and instructions. Your statutory rights are not affected.
