PONYTAILS
£44.99
Dispatch Deadline:
Submit your order in the next:
Add rich brunette length and fuller-looking results with our #2 Dark Brown 14 Inch Tape-In Hair Extensions. Each pack contains 20 individual tape-in pieces made from Chinese Remy human hair, providing approximately 50g of extension hair in total.
Each piece weighs approximately 2.5g and measures around 4cm / 1.5 inches wide. At approximately 14 inches / 36cm long, these extensions can be used to add shorter-length extension hair, additional thickness or length where a longer extension is not required.
#2 Dark Brown is a rich, deep brunette shade. It is lighter and more distinctly brown than #1B Off Black, slightly deeper than #3 Dark Chocolate Brown and noticeably darker than #4 Chocolate Brown.
Tape-In extensions use pre-attached adhesive tabs to secure sections of extension hair to the natural hair. The attachment sits relatively flat, so careful sectioning, preparation and placement are important during fitting.
Professional application by a qualified, trained hair-extension stylist is recommended. A stylist can assess the natural hair, plan the placement and determine the appropriate number of packs for the required result.
For further fitting information, view our Tape-In Hair Extensions Application Guide .
The amount required will depend on the thickness and density of the natural hair, its existing length and the amount of additional fullness or length required.
These quantities are general guides rather than fixed requirements. Depending on the natural hair and intended result, more or fewer packs may be appropriate.
These Tape-In extensions are made from Chinese Remy human hair and have a silky, straight texture. Correct care and maintenance are important throughout the wear period, particularly around the adhesive attachment areas.
If heated styling tools are used, apply a suitable heat-protection product and avoid excessive temperatures. Keep direct heat away from the adhesive tape tabs, as excessive heat around the attachment may affect the bond.
The tape attachments can remain secure for approximately 1–2 months, although actual wear will vary according to fitting, aftercare, washing frequency, natural hair oils and other factors.
When the extensions have been removed and are suitable for reuse, replacement adhesive tabs can be applied using HairX Pro Replacement Tape Tabs .
Before fitting or reapplying Tape-In extensions, the natural hair and attachment area should be prepared appropriately and kept free from conditioners, oils and styling products that could interfere with the adhesive.
Tape-In extensions should be removed carefully using a suitable tape-extension remover rather than pulling the adhesive attachments away from the natural hair.
Our Tape-In Hair Extensions Remover is designed for use when removing compatible Tape-In adhesive attachments. Always follow the product instructions carefully.
With correct care and maintenance, the extension hair has an approximate lifespan of 2–3 months. Handle the hair gently when brushing, washing, drying and styling, paying particular attention to the tape attachment areas.
Avoid applying oils, conditioners, creams or other slippery products directly onto the adhesive tabs, as these may affect the attachment.
For further maintenance information, view our Essential Hair Extension Aftercare Guide .
These accessories and guides can help with fitting, removing and reapplying your Tape-In Hair Extensions.
Replacement adhesive tabs for compatible Tape-In Hair Extensions. Useful when preparing previously removed extensions for suitable reapplication.
A removal solution for compatible Tape-In adhesive attachments. Follow the product instructions carefully when loosening and removing Tape-In extensions from the natural hair.
Read our fitting guide for information about preparing, sectioning and applying Tape-In Hair Extensions, together with useful fitting and removal guidance.
A professional application tool designed to help apply even pressure when securing compatible Tape-In Hair Extension attachments during fitting.
#2 Dark Brown is a rich, deep brunette shade that is clearly brown rather than black.
Compared with #1B Off Black, #2 is noticeably lighter and more brunette. #1B remains very close to black with only subtle brown depth, whereas #2 has a clearer dark-brown appearance.
Compared with #3 Dark Chocolate Brown, #2 is slightly deeper and darker. #3 has a softer chocolate-brown character, whereas #2 retains greater brunette depth.
Compared with #4 Chocolate Brown, #2 is noticeably darker. #4 sits further into the medium-to-dark brunette range with a softer chocolate appearance.
If #1B Off Black appears too dark but #3 Dark Chocolate Brown looks too soft or light, #2 Dark Brown may be the closer shade to compare.
For the best colour comparison, check the extensions against the mid-lengths and ends of the natural hair in good natural daylight rather than matching only against the roots.
Unsure which shade to choose? View our Hair Extension Colour Chart .
These individual Chinese Remy human hair extensions use a pre-bonded keratin Nail-Tip / U-Tip attachment and are fitted professionally using a fusion heat connector.
At approximately 0.5g per strand, this range provides a lighter individual strand that is useful for flexible placement and blending.
These extensions are supplied in quantities of 25 strands.
As a general guide, approximately 150–200 strands (6–8 bundles) may be used for a full-head application, while around 75–100 strands (3–4 bundles) may be used for a half-head application.
The exact amount required depends on your natural hair thickness, density, existing length and the finished result you want to achieve. We recommend discussing the required quantity with your hairstylist before ordering.
Nail-Tip extensions use a heat-fusion fitting method. The pre-bonded keratin tip is softened using a professional fusion heat connector and secured around an appropriately sized section of natural hair.
View our full Nail-Tip / U-Tip fitting guide.
Nail-Tip extensions should be removed carefully using suitable professional removal products and tools to soften and separate the keratin attachment from the natural hair.
View our full Nail-Tip / U-Tip removal guide.
With suitable aftercare, the extensions can be worn for approximately 2–3 months. They can be washed, curled and straightened, while care should be taken around the keratin attachments.
View our hair extension aftercare advice.
Half-Head: approximately 2–3 packs / 100–150g.
Fuller Application: approximately 3–4 packs / 150–200g.
These quantities are general guidance only. Natural-hair density, head size, existing length, desired volume and the planned placement can all affect the amount required.
We recommend a professional consultation before fitting so the correct amount and placement can be assessed for the individual client.
Tape-In extensions should be professionally fitted to clean, completely dry natural hair. Oils, conditioners, serums and styling-product residue around the attachment area can interfere with adhesion.
For a standard tape-sandwich fitting, create a neat fitting row and isolate an appropriate section of natural hair. Position one pre-taped panel beneath the section, align a second panel above it and make sure the natural hair is distributed evenly between the two adhesive areas.
Once the panels are correctly aligned, use suitable Tape-In application pliers to apply controlled, even pressure across the attachment. The finished panels should sit flat and secure while allowing comfortable natural movement.
Do not place Tape-In panels tightly against the scalp, contaminate the adhesive with fingers or products, or use direct heat on the adhesive attachment.
Tape-In extensions should be professionally removed using a compatible Tape-In adhesive remover. Work with one attachment at a time and apply the remover directly to the adhesive area.
Allow the removal solution time to soften and release the tape before carefully separating the panels. Never pull, peel or force a resistant attachment away from the natural hair.
After removal, clear old adhesive residue from reusable Tape-In panels and prepare them correctly before applying fresh compatible replacement tape tabs for professional refitting.
Brush fitted extension hair gently from the ends upwards while supporting the hair near the Tape-In attachment areas. Avoid unnecessary pulling or tension on the panels.
Wash fitted extensions upright using lukewarm water and suitable hair-extension products. Keep oils, conditioners, masks, creams and other slippery products away from the adhesive tabs.
Dry the natural-hair roots and Tape-In attachment areas thoroughly before sleeping. Never sleep with fitted extensions wet or damp, and keep concentrated heat away from the adhesive panels.
Use suitable heat protection through the human-hair lengths. We do not recommend dyeing, bleaching or toning HairXtensions hair, or using silver, purple, blue or other colour-depositing shampoos.
Use compatible professional tools and adhesive products for Tape-In fitting, removal and suitable refitting.
Please check the colour, length and suitability before removing the hygiene ribbon or fitting the extensions.
Tape-In Hair Extensions must remain unused and with the hygiene ribbon intact to be eligible for return under the applicable 28-day returns policy.
Extensions that have been fitted, worn, washed, heat styled, coloured, toned, bleached, had the hygiene ribbon removed or otherwise modified are normally not returnable as an unused change-of-mind return.